I ran a 4" PVC pipe into my house. I removed a few bricks with a hammer and
chisel and drilled through the wood with a hole saw. I broke some of the
bricks in half and replaced them to create a circle around the pipe. It
looks great. Drilling through brick is very tough. It's much easier just
to remove them.
John
----- Original Message -----
From: <KB2HUK@aol.com>
To: <towertalk@contesting.com>
Sent: Wednesday, August 21, 2002 10:06 PM
Subject: [Towertalk] what drill to use ?
Hi Guys ! I am bringing a 1.5 inch pvc pipe into my house which carries the
coax from the tower to my rig. I have a brick house, does anyone know what
kind of drill bit I should use or where I can get one ? I would like to
make
a clean hole in the brick and I will continue with a wood saw to finish the
hole into the house .. thanks
John KB2HUK
_______________________________________________
Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
any weather station price.
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|