I hired someone to do the job. I think they were a plumber. They have
special concrete saws (diamond cutting edges) that make a perfectly round,
smooth hole through the brick and the siding as well if you wish. They know
what they are doing and have the tools to do it. You may find it is cheaper
than buying a drill. In my case I was installing a 4 inch vent into the
house so there was no thought of buying my very own, use it one time diamond
edged hole saw.
Tod, KOTO
-----Original Message-----
From: towertalk-admin@contesting.com
[mailto:towertalk-admin@contesting.com]On Behalf Of KB2HUK@aol.com
Sent: Wednesday, August 21, 2002 9:07 PM
To: towertalk@contesting.com
Subject: [Towertalk] what drill to use ?
Hi Guys ! I am bringing a 1.5 inch pvc pipe into my house which carries the
coax from the tower to my rig. I have a brick house, does anyone know what
kind of drill bit I should use or where I can get one ? I would like to
make
a clean hole in the brick and I will continue with a wood saw to finish the
hole into the house .. thanks
John KB2HUK
_______________________________________________
Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
any weather station price.
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|