To: | <towertalk@contesting.com> |
---|---|
Subject: | [Towertalk] Coax opinions |
From: | mjwetzel@comcast.net (Mike Wetzel) |
Date: | Wed, 07 Aug 2002 18:11:48 -0500 |
All this talk about coax and I find I am low on Belden 8267 or RG-213. That's what I have always used for phasing lines and short tower runs. I see the actual Belden price (from Newark) is about .90/ft as compared to generic RG-213 from R and L and Cable-Xperts that is about $.40/ft (not Belden). I know the Belden is Mil spec and the others aren't, but the composition and loss seem to be the same. What is the general feeling about these other less expensive RG-213's? Is there any reason to stay with the Belden and pay the high dollars? Mike W9RE |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Towertalk] Coax opinions, Steve Katz |
---|---|
Next by Date: | [Towertalk] silver solder ok for Ground wire to rod ?, Guy Olinger, K2AV |
Previous by Thread: | [Towertalk] Coax opinions, Steve Katz |
Next by Thread: | [Towertalk] Coax opinions, David |
Indexes: | [Date] [Thread] [Top] [All Lists] |