Towertalk
[Top] [All Lists]

[Towertalk] silver solder ok for Ground wire to rod ?

To: <towertalk@contesting.com>
Subject: [Towertalk] silver solder ok for Ground wire to rod ?
From: ve7hcb@rac.ca (Chris BONDE)
Date: Tue, 06 Aug 2002 16:33:08 -0700
At 11:17 AM 2002-08-06 -0400, Richard M. Gillingham wrote:
>Prestolyte is acetylene..made by combining water and calcium carbide.
>Used by welders and plumbers..  Mapp is a petroeum dirivative as is 
>propane..  Can't get a flame as hot as with acetylene...
>
>Y'all be careful, hear..
>
>gil, W1RG
>
>Mark wrote:
That is what the miners of old did, for the lamps on their hats.  A big 
step up from candles on the timbers.  However, I think that the gas is now 
available compressed in cylinders.  A US company, now swalled by another US 
company made its start on such,  Union Carbide.

But if you use the carbide and water method "Y'all be careful,  ... " and 
better be, just ask me.

A friedn made a boom can and almost lost his eye sight.

Chris opr VE7HCB



<Prev in Thread] Current Thread [Next in Thread>