An easy method of mounting these choke baluns wound around (or inside) a
PVC form is to suspend a 2" (or whatever needed to fit over the boom)
piece of PVC inside the larger form, then slip it over the boom. I leave
about 1" of the inner piece extending out from the larger form, slit the
end and secure with a hoseclamp to the main boom.
The only downside to this is replacement. Should you blow it up, you
will have to disassemble the beam!
I have sucessfully wound these baluns on the INSIDE of a 6" form, then
filled it with foam. This makes a nice weatherproof balun and it looks
really cool on the antenna.
--
Thomas M. Delker - K1KY CFO#395 - Smyrna/Gallatin, TN (IRLP NODE #466)
A.R.R.L. District Emergency Coordinator - Tennessee District #4
Middle Tennessee Skywarn Homepage: http://www.mtsh.org
C.A.T.S. (W4CAT) - 147.30/145.23/145.49/145.17/223.98/444.45/444.65
Stones River A.R.C. (K4FUN) - http://www.members.home.com/srarc
Tennessee Contest Group (K4TCG) - http://www.k4ro.net/tcg.html
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|