Tom, Bill:
I've got a Mosley Classic 33 WARC and they recommend an 8 inch diameter coil of
RG8 for that antenna, 10 inch if you use the 40m kit on the ends
of the driven element.
Tom, WW5L
Tom Osborne wrote:
> Bill Coleman wrote:
>
> > >On 11/4/01 12:07 AM, Rod Elliott at elliottr@hurontel.on.ca wrote:
>
> > >Also, any suggestions for the best way to attach the coil to the boom?
> >
> > Wind the coil on a piece of 4" PVC pipe. Make the pipe a few >inches longer
> > than the coil. Use a U-bolt to hold the PVC pipe >to the boom.
>
> I may be wrong, but I thought the coils need to be at least 8" in
> diameter to work. Isn't winding RG8 in a 4" circle kinda
> stressing it a bit? 73
> Tom W7WHY
>
> List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also check out our self
> supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|