At 06:24 PM 8/15/01 -0700, K3KO and Al Williams wrote:
>
>
>> Just for kicks I ran EZNEC for ............
>> I don't have a model for the 402CD. It would be interesting to
>> actually run such a model at the two heights.
>> 73 de Brian/K3KO
>
>Is there a reflector/forum somewhere for antenna modeling?
Yes, but it is almost quiescent -- antennaware@contesting.com.
If you know the location where the coils are installed and the other
dimensions, it should be fairly easy to add inductance until the antenna
comes into the right resonant frequency -- it won't simulate the capacity
hats, but it should be pretty close. Much easier than linear loading!
73, Pete N4ZR
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|