Tom el al.....a .01 Hi-voltage cap from the AC leads to the copper ground
did the trick....no more "dancing" porch lights when I'm on the air!
Thanks to all for your help......73
/ed
> > Any quick and easy suggestions to cure RF getting into my el cheapo
> > motion/heat-sensing porch lights? I'm thinking of trying small caps
>across
> > the input circuit?
> >
> > Thanks and 73......./k6sdw
>
>Any capacitor placed across a power line must be UL/CSA rated
>for line-bypass applications. The components are clearly marked
>with AC voltage ratings, and have UL/CSA and perhaps VDE logo's
>on them.
>
>Remember all those TV set fires in the 60's and 70's? Many were
>caused by power line bypasses. Normal disk capacitors will flame
>up like a torch if they short, and shorts are common because of
>line transients unless the capacitor is rated at well over 1kV dc.
>
>Whatever you do, small capacitors like that are a source of great
>heat if they fail. Be sure you have a proper flameproof enclosure
>and use the proper capacitor for line-bypass!!!
>
>I've had success using .01uF 250VAC rated capacitors, in
>conjunction with ferrite beads over the leads arriving at the box, to
>tame my motion detecting lights.
>73, Tom W8JI
>W8JI@contesting.com
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|