Towertalk
[Top] [All Lists]

[TowerTalk] Identifying EHS wire

To: <towertalk@contesting.com>
Subject: [TowerTalk] Identifying EHS wire
From: n2mg@contesting.com (Mike Gilmer - N2MG)
Date: 4 May 2001 12:52:14 -0700
Is there anyway to "prove" that a hunk of 1/4" cable is EHS?

I recently became the "proud" owner of ~1000 feet of unused 1/4" guy wire.  The 
spool that it was on had no visible identification - however the wire "looks 
like" the 1/4" EHS that I already own.

73 Mike N2MG

________________________________________________
PeoplePC:  It's for people. And it's just smart. 
http://www.peoplepc.com 

List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>