Towertalk
[Top] [All Lists]

[TowerTalk] Getting a PVC Current Balun Apart

To: <towertalk@contesting.com>
Subject: [TowerTalk] Getting a PVC Current Balun Apart
From: ve6yc@home.com (Peter Larsen)
Date: Mon, 15 Nov 1999 18:54:20 +0000
> But once they are glued they don't come apart.

The reason they don't come apart is quite simple. The glue
actually melts the pvc chemically and fuses the two parts 
together. I usually chip off the outside part (elbow
or nipple) and then sand down the pipe. 
As my brother is a plumber, I get my parts at a reduced
rate (Free most of the time ;-)

Good luck.
-- 
 Peter J. Larsen
 VE6YC  DO21wc

> If all the world is a stage, where is the audience sitting?

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>