[TowerTalk] Mast steps

[KJ6Y@aol.com (KJ6Y@aol.com)]

You can easily make your own with 1-1 1/2" angle iron and ubolts with 
saddles.  I tack welded the saddle to the angle iron then drilled the holes.  
One less thing to drop while installing.
Skip, KJ6Y
<A HREF="http://members.aol.com/kj6y/skip.html";>Communications Service Co</A> 

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm