Randy,
Find an old inner tube and slice it open. Wrap the mast with one turn
and retighten th u-bolts/ clamps around it. That should take care of
the problem.
I have a Ham IV currently turning a TH7 and a 402BA with no slips or
rotor damage after 17 years of service.
73, Bob, W5AH
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|