In a message dated 98-12-25 09:15:15 EST, ea3cr@redestb.es writes:
> I have installed two thrust bearing, but only support lateral forces, not
> vertical force (weight).
>
> I'm planning a new antenna system that weights (mast + 2 yagis) 660 pounds,
> with also two thrust bearing that support lateral forces, not vertical
force
> (weight).
>
> My OR-2800 rotator can support this weight with no problems?.
>
> It is advisable install a one of the two trust-bearing to support the
system
> weight to help the rotator?.
As I recall, the instructions say for ALL of the weight to be on the
rotator. Check your manual.
Cheers, Steve K7LXC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|