Pete, yes they are still made. Electrical supply houses have them. 3/4" hole
saws work great also.
Jim/NV3V
-----Original Message-----
From: Pete Smith <n4zr@contesting.com>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Thursday, July 23, 1998 10:11
Subject: [TowerTalk] mounting barrel connectors on lightning bulkhead
>
>I am adding a ground-level grounding panel for better lightning protection
>for my TOWER and ANTENNAS, and am not looking forward to drilling many
>holes for coax connectors, then reaming to size (I lack a large-enough
>drill). What other options are out there? Do they still make chassis
>punches to do this job?
>
>
>
>73, Pete Smith N4ZR
>In wild, wonderful, fairly rare WEST Virginia
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|