Is it in general coverage mode? My Icom actes the same way when in
general/out of band mode.
Paul, WG0G/W2
______________________________ Reply Separator _________________________________
Subject: [TowerTalk] TS-940 problem help please
Author: K7LXC@aol.com at smtplink-rammob
To: <towertalk@contesting.com>
Date: 1/28/98 3:49 PM
I haven't used my TS-940 much recently but I decided I wanted to listen
to 20M the other day so I hit the power switch. It came on and the rx worked
just fine. But it doesn't transmit. No output power, no swr, no relays, no
nothing. I turned it on and off several times and realized that I didn't hear
any of the relay latching that I usually hear. When I hit the transmit button,
I don't hear any relays clicking there either. The manual is no help. I've
tried different bands and modes but nada. It's always worked before.
I would appreciate any help. I can always send it out for repair but was
hoping to get a little closer to the problem before I ship it out.
73 and tnx, Steve K7LXC, QCAO
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|