K7LXC sez:
> I haven't used my TS-940 much recently but I decided I wanted to
> listen
> to 20M the other day so I hit the power switch. It came on and the rx
> worked
> just fine. But it doesn't transmit. No output power, no swr, no
> relays, no
> nothing. I turned it on and off several times and realized that I
> didn't hear
> any of the relay latching that I usually hear. When I hit the transmit
> button,
> I don't hear any relays clicking there either. The manual is no help.
> I've
> tried different bands and modes but nada. It's always worked before.
>
Steve, this may be a long shot, but very much the same thing happened
with my TS690S when the press-to-talk bar on the MC60A microphone
accidently got locked down while the radio was turned off (easy to do on
my crowded desk). When the rig was turned on it worked on receive
(seems like I also recall the sensitivity seemed poor) but wouldn't xmit
until I noticed the locked PTT bar and unlocked it. Hope yours is as
simple.
73 Dave WD5N
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|