Towertalk
[Top] [All Lists]

[TowerTalk] Stripper for RG 213

To: <towertalk@contesting.com>
Subject: [TowerTalk] Stripper for RG 213
From: sawyers@inav.net (Steve Sawyers n0yvy)
Date: Sat, 06 Dec 1997 20:49:53 -0600
I use a thermal stripper to strip the jacket and dielectric. Usually
have to smooth the outside of the jacket with some sand paper. I also
only use "N" connectors, but the trick is the thermal wire strippers.

de n0yvy steve

Len Schaier wrote:
> 
> Hello all,
> 
> I'm going bananas trying to make up good, clean, RG213 - PL239 connections.
> A big part of my problem is my "stripping" technique. Can anybody suggest a
> good stripper that will do RG213 and where I might be able to buy it.
> 
> Thanks in advance.
> 
> Len
> 
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>