[TowerTalk] Stripper for RG 213

[harpole@pegasus.cc.ucf.edu (Charles H. Harpole)]

Ok, I have had it.  Here is how to trim coax for installing a PL-259:
Use sharp knife and cut around the outer plastic while not knicking the
braid.  Tin braid around the lower part of the exposed braid.  Use a flush
cutting dikes (wire cutters) to trim the braid back to level where plug
holes will line up.  Use same sharp knife to trim off inner plastic.  Tin
center conductor lightly.  Assemble plug.K4VUD


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search