Towertalk
[Top] [All Lists]

[TowerTalk] RG-213 et al

To: <towertalk@contesting.com>
Subject: [TowerTalk] RG-213 et al
From: RSOLOMON@systems.TEXTRON.COM (RSOLOMON@systems.TEXTRON.COM)
Date: Wed, 3 Dec 1997 16:16:06 -0500
     If I recall, I used to fold the braid back over the black outer
     covering and screw on the PL-259. Worked quite well in most
     applications. As far as impedance continuity, I would be more
     concerned about the PL-259, it's not even close to a 50 ohm
     connector, BUT, at HF frequencies, the bump in the line will
     never get noticed, if indeed there is a bump. Something
     about the 1/10 wavelength rule ??
     73, Dick, W1KSZ
     rsolomon@systems.textron.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>