JAMES T BRANNIGAN wrote:
>
> Chris,
> Lessee, 30 seconds times the 110 or so rivets in a C3-S is about one
> hour of rivet time, add to that looking in the manual,
You gotta do that anyway
> dropping a few rivets,
dropping a hose clamp,
> rechecking, putting NOALOX on the many sections,
you gotta do that anyway
> rechecking, dropping a few rivets,
dropping the scredriver,
> clearing the rivet tool, checking the manual.........
you gotta do that anyway
> This is a LOT more time consuming than putting 24 hose clamps
> (approx) on the typical tribander.
I'll bet I could pop in 4 or 5 rivets while you are tightning one hose
clamp
> I'm not knocking the Force 12. The instructions and markings are
> excellent...It just takes a little time and patience to put one
> together.
>
> 73 Jim WB2TPS
>
> --
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|