Towertalk
[Top] [All Lists]

[TowerTalk] Rotor Installation

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rotor Installation
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Tue, 17 Jun 1997 10:36:37 -0400 (EDT)
In a message dated 97-06-17 00:28:07 EDT, harpole@pegasus.cc.ucf.edu (Charles
H. Harpole) writes:

>  I have done this
>  operation--with a factory fresh non-modified tower three times.
>  The rotor shelf does not have to be upside down, and no cross arms need to
>  be removed.  

      I wonder what change the factory has made that allows this. That's a
new one on me.

>The BX is getting a little bit of a bad rap in general, and
>  this error needs correction. 

       There's a reason why the BX gets a bad rap, it's a cheap semi-useful
tower barely useable for amateur HF beam installations that's difficult to
work on. I think that about covers it.

73,  Steve  K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>