Towertalk
[Top] [All Lists]

Tower refinishing

To: <towertalk@contesting.com>
Subject: Tower refinishing
From: sawyers@inav.net (Steve Sawyers n0yvy)
Date: Mon, 09 Dec 1996 22:42:39 -0600
One way to refinish is to have them stripped and regalvanized.

The American Galvanizers Association has a web page at
http://usalink.net/aga/

It lists members from around the country. Take a look and find one close
and see what they well do. 

On some heavy rolled angle tower, the one in St Louis quoted me $.10/lb.
to strip and $.20/lb to regalvanize. This was on 1/4" stock or heavier,
so the price may be more on thinner metal.

Not all the members will strip due to hazardous waste disposal
requirements.

de n0yvy steve


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>