To: | Top Band List List <topband@contesting.com> |
---|---|
Subject: | Re: Topband: Quarter wave sloper on crank up tower ? |
From: | Steve Lawrence via Topband <topband@contesting.com> |
Reply-to: | wb6rse1@mac.com |
Date: | Tue, 6 May 2025 12:11:13 -0700 |
List-post: | <mailto:topband@contesting.com> |
That "Lousy" counterpoise shunt feed has resulted in 225 "Current DXCC" and 39 zones on 160. 280+ on 80 and all 40 zones. Try what space allows. GL - Steve WB6RSE > On May 6, 2025, at 11:56 AM, Jim Brown <jim@audiosystemsgroup.com> wrote: > >> On 5/6/2025 10:33 AM, Steve Lawrence via Topband wrote: >>> I have no radials either. No place for them. Just two copper ground rods at >>> the tower base. >> > That's a LOUSY counterpoise _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: Quarter wave sloper on crank up tower ?, Jim Brown |
---|---|
Next by Date: | Re: Topband: Quarter wave sloper on crank up tower ?, Jim Brown |
Previous by Thread: | Re: Topband: Quarter wave sloper on crank up tower ?, Jim Brown |
Next by Thread: | Re: Topband: Quarter wave sloper on crank up tower ?, Jim Brown |
Indexes: | [Date] [Thread] [Top] [All Lists] |