Topband
[Top] [All Lists]

Re: Topband: NCC-2 NCC-1

To: topband@contesting.com
Subject: Re: Topband: NCC-2 NCC-1
From: "(null) cahall10" <cahall10@frontier.com>
Date: Mon, 23 Dec 2024 13:57:26 -0500
List-post: <mailto:topband@contesting.com>
I recently constructed K9AY loops with an Aziloop system.  Unfortunately, the 
cold weather in NE Ohio caused the telescoping fiberglass mast to collapse 
(need to add clamps).  I’m hoping there is no damage to the loop control unit 
from moisture ingress.  When I get this back up and running, I plan to use it 
with my transmit tee antenna and my NCC-2 to hopefully further improve receive 
performance on 160 against local noise.  It will be interesting to hear how 
others are doing with the NCC-2.
DE Charlie KC9LA

Sent from my iPhone

> On Dec 23, 2024, at 12:00 PM, topband-request@contesting.com wrote:
> 
> Send Topband mailing list submissions to
>    topband@contesting.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://lists.contesting.com/mailman/listinfo/topband
> or, via email, send a message with subject or body 'help' to
>    topband-request@contesting.com
> 
> You can reach the person managing the list at
>    topband-owner@contesting.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Topband digest..."
> 
> 
> Today's Topics:
> 
>   1. NCC-2 NCC-1 (Andree DL8LAS)
>   2. Re: NCC-2 NCC-1 (Steve Muenich)
>   3. Re: NCC-2 NCC-1 (Mike Waters)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Mon, 23 Dec 2024 14:07:06 +0000 (UTC)
> From: Andree DL8LAS <dl8las@aol.com>
> To: "topband@contesting.com" <topband@contesting.com>
> Subject: Topband: NCC-2 NCC-1
> Message-ID: <662474152.6382520.1734962826391@mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
> 
> Hey,do any of you use an NCC-2 or NCC-1 for antenna phasing or noise 
> reduction? Do you have any experiences and can give  me information?
> 73 Andy DL8LAS
> 
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Mon, 23 Dec 2024 08:51:46 -0600
> From: Steve Muenich <srmuenich@gmail.com>
> To: Andree DL8LAS <dl8las@aol.com>
> Cc: topband@contesting.com
> Subject: Re: Topband: NCC-2 NCC-1
> Message-ID: <3A88712A-A4B2-4668-9F38-320ECEE927FA@gmail.com>
> Content-Type: text/plain; charset=utf-8
> 
> Andy,
> I just got a NCC-2 from a QRZ seller.  
> It has several optional modules.
> 
> My noise is mostly on the higher HF bands.  I know the approximate location 
> of the source of the noise.
> I installed a hi-impedance vertical element about 150ft away from the noise 
> source and it?s connected to my B input on NCC-2.  
> Input A in my main TX antenna which is a yagi at 120ft.
> The NCC-2 works good at removing most of the noise.   It does take some time 
> to get used to adjusting it.  
> I?ve only had it hooked up a couple weeks so still learning how to use.  Feel 
> free to contact me privately if you would like.
> 
> 73,
> Steve NA5C
> 
> 
> Sent from my mobile device
> 
>> On Dec 23, 2024, at 8:12?AM, Andree DL8LAS via Topband 
>> <topband@contesting.com> wrote:
>> 
>> ?Hey,do any of you use an NCC-2 or NCC-1 for antenna phasing or noise 
>> reduction? Do you have any experiences and can give  me information?
>> 73 Andy DL8LAS
>> 
>> _________________
>> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
> 
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Mon, 23 Dec 2024 09:35:49 -0600
> From: Mike Waters <mikewate@gmail.com>
> To: Steve Muenich <srmuenich@gmail.com>
> Cc: Andree DL8LAS <dl8las@aol.com>, topband <topband@contesting.com>
> Subject: Re: Topband: NCC-2 NCC-1
> Message-ID:
>    <CA+FxYXjswBfc3FGOtEEKtsxcgw4Uog0D0aOwK_S+TuMY2ua8HA@mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
> 
> Gentlemen,
> 
> I know from experience that the closer the noise pickup antenna is to the
> noise, the better.
> 
> The idea is to pick up as much of the unwanted local noise signal as
> possible (within reason), so the noise canceller can null it out.
> 
> My best "noise antenna" was a Beverage pointed directly at the noise. :-)
> 
> 73 Mike
> W0BTU
> https://web.archive.org/web/20190827040547/http://w0btu.com/
> 
> 
>> On Mon, Dec 23, 2024, 9:19 AM Steve Muenich <srmuenich@gmail.com> wrote:
>> 
>> 
>> I installed a hi-impedance vertical element about 150ft away from the
>> noise source
>> 
> 
> 
> ------------------------------
> 
> Subject: Digest Footer
> 
> _______________________________________________
> Topband mailing list
> Topband@contesting.com
> http://lists.contesting.com/mailman/listinfo/topband
> 
> 
> ------------------------------
> 
> End of Topband Digest, Vol 264, Issue 19
> ****************************************


_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
<Prev in Thread] Current Thread [Next in Thread>