To: | topband@contesting.com |
---|---|
Subject: | Re: Topband: Quarter wave sloper ? |
From: | "jim.thom jim.thom@telus.net" <jim.thom@telus.net> |
Date: | Sun, 28 Jul 2024 02:34:56 -0700 |
List-post: | <mailto:topband@contesting.com> |
<Hopefully - the 40M yagi has the elements connected to the boom. <Tree N6TR Just came up with a method to bond the 40m REF + DIR to the boom. By adding one vac relay to each nema box, I could just electrically bond the flat strap coil inside each nema box...to the boom. Activate both relays when on 160m. I have a mess of new DPST-NO Kilovac relays. I will parallel the contacts on each relay. Problem solved. Then the 40m yagi will appear as semi decent top loading...esp with the 50+ foot long eles. Jim VE7RF _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: Topband Digest, Vol 259, Issue 14, Tom Boucher |
---|---|
Next by Date: | Topband: Reflector, n4cc |
Previous by Thread: | Re: Topband: Quarter wave sloper ?, Mark, PA5MW via Topband |
Next by Thread: | Topband: WG: AW: Quarter wave sloper ?, dj7ww@t-online.de |
Indexes: | [Date] [Thread] [Top] [All Lists] |