Topband
[Top] [All Lists]

Re: Topband: Topband Power Line Noise issue

To: "'topband@contesting.com'" <topband@contesting.com>
Subject: Re: Topband: Topband Power Line Noise issue
From: W3HKK@roadrunner.com
Reply-to: W3HKK@roadrunner.com
Date: Sat, 13 Apr 2024 16:12:33 +0000
List-post: <mailto:topband@contesting.com>
Been having some loud power line noise ( again) . A few years ago a
friend and I used a portable AM radio to locate a lightning arrestor
that was continuously arcing to ground and creating quite a racket.
The engineer could hear the arcing from the street as we got closer to
the pole and had it fixed an hour later.

A month ago I noticed the same sounding power line noise (S3)coming
from the SW ( on 10 and 5m yagis.) and drove around the block til I
found it.

Then a few days ago a new source of RFI began buzzing at 59+10. A few
months ago my old 2M HT died, so I needed a new one. Bought the Alinco
for under $100, because it has an AM VHF band for aircraft traffic. So
this was my first chance to test it.

I had barely driven down the street when the noise appeared, peaked
right at my intersection with an adjoining road, then faded as I drove
down that road in both directions. 

Being a Saturday, I sent an email to the utility summarizing the RFI
problem, identifying the location of both sources (of their energy
loss), and volunteering my services to work with their engineers when
they come out.

Last time they came out within a week or so. TBC

Bob W3HKK

        -----------------------------------------From:
topband-request@contesting.com
To: topband@contesting.com
Cc: 
Sent: Thursday April 11 2024 12:00:38PM
Subject: Topband Digest, Vol 256, Issue 7

 Send Topband mailing list submissions to
 topband@contesting.com

 To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/topband
 /> or, via email, send a message with subject or body 'help' to
 topband-request@contestingcom

 You can reach the person managing the list at
 topband-owner@contesting.com

 When replying, please edit your Subject line so it is more specific
 than "Re: Contents of Topband digest..."

 Today's Topics:

 1. Re: B7P (jim.thom jim.thom@telus.net)

 ----------------------------------------------------------------------

 Message: 1
 Date: Wed, 10 Apr 2024 10:15:37 -0700
 From: "jim.thom jim.thom@telus.net" 
 To: topband@contesting.com
 Subject: Re: Topband: B7P
 Message-ID:

 Content-Type: text/plain; charset="UTF-8"

 Date: Thu, 4 Apr 2024 11:13:12 -0700
 From: Michael Tope 
 To: topband@contesting.com
 Subject: Re: Topband: B7P
 Message-ID: 
 Content-Type: text/plain; charset=UTF-8; format=flowed

 I have a 402CD ready to go once I get another tower up. We'll see how
 that works :-)

 73, Mike W4EF.............

 ## At the VE7ZZZ MM station, back in the 80's, they had a 402CD up
65'.
 I got to use it one night..summertime, while passing through their
neck of
 the woods That was the most fun I have had to date. They were on 19
 acres, on a hill, overlooking a lake. They had to generate their own
AC
 power. Nearest, and only neighbour was 3/4 mile away. You can hear a
 pin drop.

 ## I had this huge JA pileup going instantly which lasted a couple of
hrs,
 till a VK called me. I rotated from 300degs..down to 257 degs, and he
 just about fell on the floor. Aprx 1300w pep out on SSB at the time.

 ## previous to that, they had tried wire ants up 90' in the pine
 trees...... and also phased verticals, you name it, they had tried
it. The
 2 el, shorty 40 cleaned house.

 ## Lemme know how it works out for you.

 ------------------------------

 Subject: Digest Footer

 _______________________________________________
 Topband mailing list
 Topband@contesting.com
 http://lists.contesting.com/mailman/listinfo/topband
 />

 ------------------------------

 End of Topband Digest, Vol 256, Issue 7
 ***************************************

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>
  • Re: Topband: Topband Power Line Noise issue, W3HKK <=