Topband
[Top] [All Lists]

Re: Topband: Bev under high power transmission lines

To: Michael Fischer <mikebfischer@comcast.net>
Subject: Re: Topband: Bev under high power transmission lines
From: Richard King <k5na@ecpi.com>
Date: Fri, 15 Jan 2021 14:34:37 +0000
List-post: <mailto:topband@contesting.com>
I would suggest not putting a beverage there.

Even if the beverage doesn't overlap the power lines, it will still be
noisy because of the alignment.

73, Richard - K5NA

On Fri, Jan 15, 2021 at 5:16 AM Michael Fischer <mikebfischer@comcast.net>
wrote:

> Topband Gents -
>
> I am constructing my NE / SW beverage and have 2 options:
>
> A. Construct a 580' beverage that would run under high power transmission
> lines  at about the 510' point on it's NE end.  (If it matters, the power
> lines are up 100' above the ground)
>
> or
>
> B. Construct a shorter beverage that does not run under the same power
> lines
>
> What would your suggestion be?
>
> Thank you for your coaching!
> 73,
> Mike
> K7XH
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>