To: | <topband@contesting.com> |
---|---|
Subject: | Re: Topband: (2wire) Beverage transformers |
From: | "List Mail" <mail10@barefoothorse.com.au> |
Date: | Sun, 3 Jan 2021 11:39:50 +1100 |
List-post: | <mailto:topband@contesting.com> |
"The best I could reach now on 160m is - SWR: 1:1.29 (Rs=40.4 Ohms, Xs=-5.4 Ohms) vs. in 2019: - SWR: 1:1.16 (Rs=43.2 Ohms, Xs=-1.6 Ohms)" If I can get those matches on a *transmitting* antenna, I am very satisfied!I built three 2-wire beverages using W0BTU's design (single coax) and measured best SWR around 1.5:1 and didn't give it a second thought. They are all 269 m long, using 2.5 mm galvanised high-tensile fencing wire. They work! 73, Luke VK3HJ _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: (2wire) Beverage transformers, Lee STRAHAN |
---|---|
Next by Date: | Topband: Influence of ground water level on vertical performance., Henk Remijn PA5KT via Topband |
Previous by Thread: | Re: Topband: (2wire) Beverage transformers, Grant Saviers |
Next by Thread: | Re: Topband: (2wire) Beverage transformers, HA3LN |
Indexes: | [Date] [Thread] [Top] [All Lists] |