I have a Whirlpool front loading washer and dryer here. I had the
factory send a technician out and they installed the RFI suppression kit
on both of them. They argued a bit with me about the installation and
the cost of the parts. As I left it I paid for the kit and they did the
install for free on both units. I can just barely hear the fact that
they're running if I really listen and I am using an indoor loop.
Outside I hear no difference. The service technician also told me that
on these modern dryers unless you're going right from the vent outlet
through the wall behind the dryer you need a booster blower inline. My
dryer vents through a rooftop vent so I installed a blower-type booster
inline with the vent in the attic. That made a huge difference in the
dryer run time. It's pressure sensing so you install it and forget it.
It comes with a small panel display you can mount if you want to and
that lets you know it's started or if you ever need to clean it (I have
never had to do that).
I also had 2 Trane air conditioning compressors and air handler/gas
furnaces installed to replace failing older systems, all variable speed.
I had contacted Trane about the RFI kits on both of the compressor units
and both of the air handlers before I bought them. They installed these
RFI kits for free and my installation company put those kits in at their
shop before they came out and did the install. Also nice and quiet.
Rick Kunath, K9AO
On 11/21/2020 2:24 PM, Mark - N5OT wrote:
Bill, you might check with your wife. I bet she is cleaning the
dryer's filter every time she uses it which might explain why you
can't find the hash.
73 - Mark N5OT
On 11/21/2020 10:18 AM, Bill Cromwell wrote:
Hi Joe,
Have you tried to do anything about the dryer? Filters? I was
concerned my clothes dryer and washing machine might do that but they
apparently don't. My poor dear wife cannot grasp operating the touch
controls for the microcontrollers in those machines. They are not LG.
They are Maytag. Maybe I am just looking in the wrong places for the
hash:) I mostly use 80, 40, and 30 meters with some 160 and 17 meters
in the mix.
I have had occasion to tame some switch mode power supplies in
computers here. It can be done.
73,
Bill KU8H
bark less - wag more
On 11/21/20 10:39 AM, Joe Galicic wrote:
Steve,
I have a LG DLE-7300WE clothes dryer that makes RFI when it's
running. I have not checked on every band but I know it makes noise
on 40 meters. My noise level rises an S unit or so with RF hash
when it's running.
Joe
N3HEE
On 11/20/2020 5:12 PM Steve Lawrence via Topband
<topband@contesting.com> wrote:
Please excuse the OT. Anyone using an LG DLG7301 Clothes Dryer?
Any RFI detected 160-6m?
Please reply off list only.
TU & 73 - Steve WB6RSE
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|