Hi All
Try
https://uk.farnell.com/multicore-loctite/629443/solder-wire-80-18-2-0-91mm-500g/dp/629443?CMP=KNC-GUK-GEN-KWL-MAN-L5Pages-New-Structure-25May2020-LOCTITE&mckv=_dc|pcrid|437370420948|&gclid=EAIaIQobChMIsZbSq_Hi6QIVCLrtCh3EzwKgEAAYASAAEgIpjvD_BwE#
This is from a UK supplier but they are part of the AVNET group of which Newark
is/was also one of their companies. Expensive but you may be able to get
smaller reels
Regards
David G4FTC
________________________________
From: Topband <topband-bounces+g4ftc=hotmail.com@contesting.com> on behalf of
Chuck Hutton <charlesh3@msn.com>
Sent: 01 June 2020 03:56
To: topband@contesting.com <topband@contesting.com>
Subject: Topband: Soldering aluminum coax shield to copper wire
Many many years ago I had partial success soldering aluminum coax shield to
copper wire using the motor oil technique. I also believe I had some flux
(unknown type) that helped.
But I had no luck with motor oil last week and can not find the flux I had,
which might be a good thing as it is 20 years old.
So what is the easy reliable cheap method to get the job done?
Chuck
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|