Re: Topband: Hi Z amplifiers for 160m

[Jim Brown <jim@audiosystemsgroup.com>]

On 3/11/2020 6:28 AM, GEORGE WALLNER wrote:
> Assuming a trans-impedance amplifier, "unity gain" is enough (with 
> reasonable size elements). Noise and IP3 are far more important. 
> Lightning and surge immunity are also important. Also, isolate the amp 
> from common mode noise travelling on the feed-line. Filter the power 
> supply well. Use an F connector (a high quality one that can be torqued.)
Agreed, but I would add power on the coax.

73, Jim K9YC
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector