Topband
[Top] [All Lists]

Re: Topband: Temporary antenna suggestion for 160

To: topband@contesting.com
Subject: Re: Topband: Temporary antenna suggestion for 160
From: Artek Manuals <Manuals@ArtekManuals.com>
Date: Sun, 15 Dec 2019 21:44:08 -0500
List-post: <mailto:topband@contesting.com>
2nd mike's point about the elevated radials if you have the room, and I underscore his point about not connecting the above gnd radials to earth ground and the need for a beefy common mode choke

Dave
NR1DX



On 12/15/2019 9:22 PM, Mike Waters wrote:
Do the inverted-L, but use at least two 10' high 1/4 wave radials.

Do NOT use an RF ground rod, or any radials on or near the earth. Just
connect the coax shield to the junction of the radials and any remote
tuner. At that point a good choke balun is necessary.

Leaving out the choke or grounding the shield will result in very poor
performance.

73, Mike
W0BTU


On Sun, Dec 15, 2019, 7:04 PM thoyer via Topband <topband@contesting.com>
wrote:

With only 9 more to go for DXCC on 160 and all of the recent posts about
how
good the band has been recently "best in years....) I find myself with no
antenna for the low bands and cringing after each post on how good the band
has been.
...
Options - I have a 45' tower with TH6DXX, 6m and 2m yagis. I could easily
string a makeshift inverted L with about 45' vertical and around 100'
horizontal. This I could string up in a few hours. the Horizontal portion
would be pointed south. Not the best of configurations but that's what I
have to work with. ...

Tom
W3TA


_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

--
Dave
Manuals@ArtekManuals.com
www.ArtekManuals.com

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>