Chuck et all
It is well documented that the the NEC-2 based programs leave something
to be desired� with wires on or very near the ground, This includes most
of the EZENEC� family and MMANA-G� Purportedly NEC-4 ( there is a Ezenec
version which runs with NEC 4 engine ... not a cheap date) does deal
with the near earth problem .
How close is "Close" is a matter of conjecture. A friend of mine and I
have been working on building and modeling vertical antennas (
Verticals, Inv-L and T's) for 160/80/40 with ELEVATED NON-RESONANT
radials at 3' and 6' (google "K5IU Elevated Radials") . The good news is
at 3' and above both NEC 2 and NEC 4 models agree within 5% or better.�
We have not done any comparisons below 3'
Dave
NR1DX
On 8/24/2019 1:41 PM, Chuck Dietz wrote:
I seem to remember someone saying the modelling programs are unreliable
when a wire is close to the ground. Also, there is really no way to model
the properties of "ground." It can vary in just a few feet and the
moisture
content varies from day to day. I think this is a "try it" kind of
antenna.
Read other's reported results.
Chuck W5PR
--
Dave
Manuals@ArtekManuals.com
www.ArtekManuals.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|