You might want to listen to this TAPR presentation on Noise and Noise
calculations.
https://youtu.be/xXXj1Ko4ZXg
I found it pretty interesting.
Mike va3mw
On Thu, Aug 1, 2019 at 2:12 PM uy0zg <uy0zg@mksat.net> wrote:
> Is the main problem here in efficiency?
>
> The main thing here - the signal is not heard by a person!
> ---
> Nick, UY0ZG
> http://www.topband.in.ua
>
> Tim Shoppa 2019-08-01 20:40:
>
>
> > The "work signals way down in the noise you could never work otherwise"
> > myth, is just part of the myth that FT8 is an effective operating mode,
> > when really it's the least efficient mode for a good op to work Q's or
> > DXCC's. See my detailed 2018 statistics by mode here:
> > http://n3qe.org/n3qe2018.jpg
> >
> > Tim N3QE
> >
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|
