Hi Sam,
In my remote base loading box I used relays AD5X specified in one of his
articles on a matching network. They might be over kill for your project
as they are 3PDT relays. The relays are Deltrol Controls part number
21014-81.
They come in various mounting configurations:
- 375F: Flange cover
- 375TM: Top mount cover
- 375P: Printed circuit terminals
I use the 375M version.
You might look and see what other relays Deltrol Controls offers.
Just FYI,
Don (wd8dsb)
On Thu, Dec 6, 2018 at 1:36 PM Sam Josuweit <samjos@epix.net> wrote:
> No
>
>
>
> From: Mike Waters [mailto:mikewate@gmail.com]
> Sent: Thursday, December 06, 2018 12:02 PM
> To: Sam Josuweit
> Cc: topband
> Subject: Re: Topband: Recomended Relays
>
>
>
> You're not planning on hot-switching it, are you? That's hard on
> amplifiers. :-)
>
>
>
> 73, Mike
>
> www.w0btu.com
>
> On Thu, Dec 6, 2018, 10:48 AM Sam Josuweit <samjos@epix.net> wrote:
>
> Can anyone recommend a good general use relay for antenna switching in the
> 800-1000w power range? I know using power relays can be a roll of the dice.
>
> According to modeling peak voltages should be less than 450V.
>
>
>
> Thanks
>
> Sam(N3XZ)
>
>
>
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|