Topband
[Top] [All Lists]

Re: Topband: WB6RSE Flag type loop question

To: topband@contesting.com
Subject: Re: Topband: WB6RSE Flag type loop question
From: donovanf@starpower.net
Date: Wed, 1 Aug 2018 12:15:03 -0400 (EDT)
List-post: <mailto:topband@contesting.com>
Hi Mike, 


A horizontally polarized loop -- or any other horizontally polarized 
160 meter antenna -- has extremely poor sensitivity when installed 
less than about 0.1 wavelenght above the ground. Even if you raise 
a horizontally polarized loop to about 0.1 wavelength (50 feet on 160 
meters) it will be a poor antenna for DXing because of its insensitivity 
to low angles of arrival. 


73 
Frank 
W3LPL 

----- Original Message -----

From: "W0MU Mike Fatchett" <w0mu@w0mu.com> 
To: topband@contesting.com 
Sent: Wednesday, August 1, 2018 3:40:10 PM 
Subject: Topband: WB6RSE Flag type loop question 

Has anyone tried a loop like this in the Horizontal plane? I suppose 
if one had an AZ mount they could try it from horizontal to Vertical. 

His flag build was in the July 2015 QST. 

W0MU 

_________________ 
Topband Reflector Archives - http://www.contesting.com/_topband 

_________________
Topband Reflector Archives - http://www.contesting.com/_topband
Sent to: mailarch@contesting.com

<Prev in Thread] Current Thread [Next in Thread>