Once a driveway was in the way of radials ... a cement blade on a circular saw
fixed that. That may work FB on soft sandstone.
73, Mike WA5POK
On Wednesday, June 20, 2018 9:23 AM, MICHAEL ST ANGELO
<mstangelo@comcast.net> wrote:
Chet,
Have you tried digging a shallow trench with an edge trimmer? They are also
known as edgers.
Mike N2MS
> On June 20, 2018 at 8:06 AM Chester Latawiec <chetlat@hotmail.com> wrote:
>
>
>
> Any suggestions on burying radials in the desert sands of Kingman AZ?
> Radials placed on the surface just stay there and are constant tripping
> hazards.
> The desert sand is like rock. The top 1/4 inch is loose sand but below that
> it's like rock. You vertually need a pick axe to loosen the sublayer. One
> option is to pick axe a shallow trench for each radial in the desert sun, but
> tripping over the radials would be a better alternative.
> Any suggestions?
> I'm really getting tired of tripping over the radials of Jess, AI9L's radial
> field.
> 73
> Chet VE3CFK
>
>
> Sent from my Samsung device
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|