Jim, et. al.,
One can also use a spring loaded wide spaced solenoid contactor to get
more voltage gap if switching to the 80 meter position.
One of the problems is building a 1500 watt tuned tank coil for 80 meters
to go from 50 ohms up to 2 KV or more at the feed point that is switched
in for 80 and out for 160.
In my opinion, it is just easier to not switch anything and put a trap in
line.
73 & GL,
George, K8GG
> Rather than use a trap at the top of an 80m vertical to transition to a
> 160
> inverted L has anyone tried a vacuum relay or even two in series at 1500w
> to handle the highvoltage when on 80m?
>
> Tnx
>
> Jim AB3CV
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|