Well, yes, the transmitter is looking into the transmission line and then the
antenna load, so they are different. To be fair you need to place the analyzer
at the input (TX) end of the line. Now the TX and the analyzer see the same
thing. But this isn't a good way to match the antenna to the line, which I
believe is the object of this exercise.
Wes N7WS
On 11/2/2017 5:14 PM, VK3HJ wrote:
I also concur with JC's recommendation.
Antenna analysers are useful, but you change the circuit when you remove the
feed line and connect the analyser. What your analyser sees is different to
what your transmitter sees.
Luke VK3HJ
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|