DXE sells some nifty ladder insulators designed for wooden posts. They
are listed at $13.95 for a bag of 25. (DXE P/N DXE-LL-LNS) In my case I
wanted to use metal fence supports with wood on the top for an easier
installation with a 3 lb maul rather than digging holes for the post
supports. While pushing my cart through Home Depot one day I stumbling
upon paint stir sticks in the paint section for .99 cents for a package
of three. They are made of pine and are 33 inches long and appear very
durable being almost 1/4 inch thick. They can flex a bit but hard to
break even over your knee. Much to my surprise the DXE Beverage
insulator snaps right on to the top portion where the paint mixer would
normally put his hand. Although not really necessary a small wood screw
would prevent any insulator from unsnapping in high winds. A coat of
Thompson's Water Seal on the paint stick is also an option. Mounting
these insulators in this fashion would bring the ladder line in a
vertical position with respect to ground. With a half twist ever 70
feet I think this would enhance the performance and not degrade it in
anyway. If I am wrong with that the Beverage gurus might possibly
correct me.
I know this is sort of a trivia post but I was amazed at how easily the
DXE insulator snapped on the paint stick. Also if wooden 2X2's are an
option for support they can be placed in line of the Beverage field
first. Then a screw gun can zip these paint sticks in place as required.
Herb Schoenbohm, KV4FZ
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|