You make my case, Cecil...my "requirements" are - I need two - and not in the
position of buying beaucoup and hoping I can sell, at cost, to others....
I forgot the minimum "reqmt" of Newark - thanks for the reminder -- ....makes
my position - small companies like W8DIZ' are more relevant when it's a
onesy-twosy thang!
72 Jim R.
________________________________________
From: Cecil Acuff <chacuff@cableone.net>
Sent: Sunday, April 3, 2016 8:40 AM
To: James Rodenkirch
Cc: topband@contesting.com
Subject: Re: Topband: Receive loop observations
Better check Newarks minimum order policy..."the fine print"...I think it's $20.
Also check Amidons cost per unit cost for the purchase of 100. Then sell the
remainder to list members who might be interested. Also keep some in your
junque box...you will go down this road again most likely.
Yeah I know...you only need two...
Cecil
K5DL
Sent using recycled electrons.
> On Apr 3, 2016, at 8:06 AM, James Rodenkirch <Rodenkirch_LLC@msn.com> wrote:
>
> I couldn't resist..................K9YC says...."The BEST way to buy ferrite
> parts is...buy in quantity from industrial distributors...."
>
> Well, first off, I don't need quantity - I need one or two ferrite
> cores.....so, I guess I'm "out of luck," eh?????
>
> Let's see --- to test K9YC's hypothesis, I went shopping, on line, at three
> distributors, one of which was recommended by K9YC, for two ferrite material
> cores...
>
> 1) Amidon
>
> 2 each FT-114-61 = $4.50
> Shipping = $13.43
> Total: 17.93
>
> 2) Newark
>
> 2 each FT-114-61 = $2.60
> Shipping = $9.30
> Total: 11.90
>
> 3) W8DIZ' Kits and parts
>
> 4 each FT-114-61 = $7.00
> Shipping = $5.34
> Total: $12.34
>
> Hmmmmmmmmmmm - looks like I can purchase two more of what I need from W8DIZ
> for $0.44 more than distributor #2......OR, put another way....it would cost
> me $2.16 more to purchase four cores from Newark than from W8DIZ. Ok, in the
> context of "fair markup," I guess "reasonable," a term used by myself and
> K7HP to describe our dealings with W8DIZ, remains an "ok" descriptor.
>
> 71.5/72 de Jim R. K9JWV
>
>
> From: Topband <topband-bounces@contesting.com> on behalf of Jim Brown
> <jim@audiosystemsgroup.com>
> Sent: Saturday, April 2, 2016 4:04 PM
> To: topband@contesting.com
> Subject: Re: Topband: Receive loop observations
>
>> On Sat,4/2/2016 12:52 PM, HankP wrote:
>> BTW Kits and Parts has good assortment of cores at reasonable
>> priceshttp://www.kitsandparts.com/toroids.php 73 Hank K7HP
>
> That depends on how much markup you consider reasonable. The BEST way,
> by far, to buy ferrite parts is to buy in quantity from industrial
> distributors like Newark, Allied, and other more specialized
> distributors that focus on magnetic materials.
>
> 73, Jim K9YC
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|