Hi
it sounds like SO2R on the same band... Its interresting for me too. I
am using one solution in CQ160m in order to use 2nd radio for S&P but
its disconnected from antenna and grounded as same as 1st radio in RUN
during TX period. So I am curious what other TBers are using...
73 - Petr, OK1RP
On Thu, Dec 17, 2015, at 07:06 AM, Bob Kupps via Topband wrote:
> Hi I was thinking about using a 3dB splitter and tuning the band with our
> second K3 using our HiZ monoband 8 circle while we were calling CQ in the
> Stew. The center of the array is located 105 meters from the xmit
> vertical, uses 20' elements, the included preamp and 100m of RG6
> transmission line.
> Could dangerously high signal levels appear at the unmuted second radio
> antenna terminal? What about if the second radio is inadvertently tuned
> to the xmit frequency? It would seem impossible if the external antenna
> preamps are not damaged...but I'm still a 1R op so I better ask first!
> TU 73 Bob HS0ZIA
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|