How about back-to-back 1N4148 diodes (2 in series) across the RX path, and
a #47 incandescent lamp between those and the Beverage? That's what I do
here, among other things.
Those are in series with my preamp, which is almost always on. There's also
some variable resistance in series with the lamp and the Beverage switching
relays. I do that so that the signal from the Beverage is equal with the RX
signal from the inverted-L.
73, Mike
www.w0btu.com
On Sat, Aug 29, 2015 at 8:06 PM, Charles Cu nningham <
charlie-cunningham@nc.rr.com> wrote:
>
> It seems to me that a very fast operating preamp protection circuit could
> be
> constructed employing a good fast saturating NPN switching transistor
> across
> the antenna path.
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|