Hi all, I have a 90 foot Rohn 25 tower with an insulated base and insulated guy
wire sections for top loading ,base fed for 160 meters. It work great ,but I
would like to use it on 80 meters as well.
The 3 ideas I have considered are voltage feed at the base with a resonant LC
network at the base, but I am a little worried about the voltages present at
legal limit power. Second idea,disconnect the top loading and put a trap
between the top loading and the tower to divorce the top loading on eighty then
an L network at the base for 80. Third idea, run a wire as a sloper either a
quarter wave fed against ground or a 1/2 wave dipole from the tower.
Any thoughts or alternative ideas would be greatly appreciated.
Glenn WW4B
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|