Topband
[Top] [All Lists]

Re: Topband: beverage pols

To: <dl8yhrfrank@aol.com>, <topband@contesting.com>
Subject: Re: Topband: beverage pols
From: "Tom W8JI" <w8ji@w8ji.com>
Reply-to: Tom W8JI <w8ji@w8ji.com>
Date: Thu, 5 Feb 2015 17:52:05 -0500
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Don't worry.

There is nothing detrimental at all even with the metal poles just a few mm from the antenna.

As long as the wire is insulated from the pole, no change or effect can be observed.

73 Tom



----- Original Message ----- From: "dl8yhrfrank--- via Topband" <topband@contesting.com>
To: <topband@contesting.com>
Sent: Thursday, February 05, 2015 5:11 PM
Subject: Topband: beverage pols


Hi all
i woud like to set my? Beverages from 1m high to 2.5m high..some told me it will improve them
So now i need new pols to hold the wire
I thought about 1m Aluminiumtube? in the ground and inside that pol a 2m peace of tropicwood..so distance from Alumminiumpol to the finaly Beveragewire shoud be arround 1 to 1.5m...annyone has experence if that is enoug distance?Though about only woodpols but in wet ground it will not survive vy long...
Vy 73
Frank
DL8YHR.de



_________________
Topband Reflector Archives - http://www.contesting.com/_topband


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4800 / Virus Database: 4257/9061 - Release Date: 02/05/15


_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>