Could someone tell me the length of top loading wires (4 wires planned) needed
to add to the top of a base insulated 90 foot Rohn 25g tower to maximize the
radiation resistance on 160 meters. I understand there is a point of
diminishing returns on the top loading lengths. The 4 wire angles will be
around 45 degrees or as close as possible. If I knew how to model ,or even
had a modeling program, I would attempt this already relatively simple task to
many.
From 50+ years of practical experience, I am ‘guessing’ maybe 28 feet long each?
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|