Topband
[Top] [All Lists]

Re: Topband: Silver solder

To: Tom W8JI <w8ji@w8ji.com>
Subject: Re: Topband: Silver solder
From: Jorge Diez CX6VM <cx6vm.jorge@gmail.com>
Date: Tue, 30 Dec 2014 23:23:52 -0200
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Hello Tom

Ok thanks for the info
I think will be using cooper wire, so I can use 2% or will ask for another 
option that has high tensile strength

A friend told me about an used 3.5 mm aluminum cable, that a company is 
replacing and we c
An buy a low cost, but don't know if this will last too many years as the 
copper wire

HNY!!

73,
Jorge
CX6VM/CW5W

Enviado desde mi iPhone

> El 30/12/2014, a las 23:02, "Tom W8JI" <w8ji@w8ji.com> escribió:
> 
> Jorge,
> 
> You do not need or want a high silver content. It will be too brittle.
> 
> What you should ask for is a solder that has high tensile strength, is 
> ductile, and works well with copper or whatever your radials are.
> 
> That will not be a high silver content. It will probably be less than 8% 
> silver with high tin content.
> 
> Higher temperature is supposedly good for resistance to lightning, although I 
> never had a joint unsolder even when regular electronics 60/40 soldered.
> 
> 
> 
> ----- Original Message ----- From: "Jorge Diez CX6VM" <cx6vm.jorge@gmail.com>
> To: "Topband" <topband@contesting.com>
> Sent: Tuesday, December 30, 2014 7:27 PM
> Subject: Topband: Silver solder
> 
> 
>> Hello
>> 
>> I read about using silver to solder wire radials to terminals
>> 
>> This week I decided to ask sellers about silver solder and they offered me a 
>> 2% and 30% silver bars
>> 
>> What we need for our use? Will be ok to use 2%? The difference in price is 
>> extremely high!
>> 
>> Thanks,
>> Jorge
>> CX6VM/CW5W
>> 
>> Enviado desde mi iPhone
>> _________________
>> Topband Reflector Archives - http://www.contesting.com/_topband
>> 
>> 
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2014.0.4794 / Virus Database: 4253/8840 - Release Date: 12/30/14
> 
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
<Prev in Thread] Current Thread [Next in Thread>