Hi Frank
Thanks for the information, so 2% will be good, nice!
I will do bolted connections to a DXE radial plate, but I was asking about
soldering the wire to a terminal to be bolted to the radial plate
HNY!!
73,
Jorge
CX6VM/CW5W
Enviado desde mi iPhone
> El 30/12/2014, a las 22:58, donovanf@starpower.net escribió:
>
> Hi Jorge,
>
> Very high cost silver solder isn't needed for radial connections. Any
> mechanically and electrically secure connection that achieves and
> maintains about an ohm or less of connection resistance will have an
> undetectable affect on the the performance of your antenna (much
> less than 1 dB) compared to lossless radial connections. Thats why
> bolted connections are so popular and just as effective.as silver solder.
>
> 73
> Frank
> W3LPL
>
>
> From: "Jorge Diez CX6VM" <cx6vm.jorge@gmail.com>
> To: "Topband" <topband@contesting.com>
> Sent: Wednesday, December 31, 2014 12:27:40 AM
> Subject: Topband: Silver solder
>
> Hello
>
> I read about using silver to solder wire radials to terminals
>
> This week I decided to ask sellers about silver solder and they offered me a
> 2% and 30% silver bars
>
> What we need for our use? Will be ok to use 2%? The difference in price is
> extremely high!
>
> Thanks,
> Jorge
> CX6VM/CW5W
>
> Enviado desde mi iPhone
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|