Topband
[Top] [All Lists]

Re: Topband: Ground rods

To: topband@contesting.com, Jim Brown <jim@audiosystemsgroup.com>
Subject: Re: Topband: Ground rods
From: "Bruce A. Clark" <k1fz@myfairpoint.net>
Reply-to: k1fz@myfairpoint.net
Date: Fri, 26 Dec 2014 16:30:39 -0500
List-post: <topband@contesting.com">mailto:topband@contesting.com>
     
Not true. Maybe you are thinking of Dipoles, Yagi etc. Try an  BOG antenna with an isolated transformer  with the ground side of the antenna winding connected to a  1 foot ground rod and check signals, then connect it to a long ground rod and see the difference. Or take the ground off the transformer completely,  and see how much signal with only one side of the 150 ohm winding connected.   Recommend long ground rods, as they are  more  consistent from band to band than a very few short receiving radials.   The KB-1 BOG antenna transformer typically has 3-4 pf inter-winding capacity. Not enough coupling, to the coax shield, to have much transformer  grounding/radial affect.  
 73
 Bruce-K1FZ
  
  
  
  
  
  

On Fri, 26 Dec 2014 12:23:32 -0800, Jim Brown <jim@audiosystemsgroup.com> wrote:
On Fri,12/26/2014 10:27 AM, Bruce A. Clark wrote:
 > > When ground rods are necessary,
 >
 > Ground rods are ALWAYS necessary for lightning protection. They are
> totally UN-important for making an antenna work better. >
 > 73, Jim K9YC
 > _________________
 > Topband Reflector Archives - http://www.contesting.com/_topband
 >
 >

  
  

_________________
Topband Reflector Archives - http://www.contesting.com/_topband
<Prev in Thread] Current Thread [Next in Thread>