thanks,,,exactly what I want and need, cheap and simple 73 john w8wej
On 12/9/2014 18:51, Gary and Kathleen Pearse wrote:
Hi John. Find a piece of wood, maybe a 2x4 and saw a slot in one end width-wise deep
enough to firmly hold a partially inserted staple without it bending. Push or drive
with a hammer against the 2x4 and force the staple into the ground over the wire flush
with the end of the wood. Remove the wood (might need to tip sideways to release the
staple if it’s tight in the slot), turn the wood 90 deg, and push down again to
finish implanting the staple. Might work, never done it.
73, Gary NL7Y
is there a simple , not overly expense tool to set land scape staples while
standing?? at 73, I do not want to go through being on my hands and knees
driving the staples in with a hammer.
thanks john w8wej
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5577 / Virus Database: 4235/8707 - Release Date: 12/09/14
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|